Recessed Stainless Steel Auto Hand Dryer
Recessed Stainless Steel Auto Hand Dryer
[ML-2400SAR_SS]
ML-2400SAR_SS
Recessed Stainless Steel Auto Hand Dryer
Recessed Stainless Steel Auto Hand Dryer
SPECIFICATIONS
Casing
#304 grade satin stainless steel 1.2mm thick
Fascia Panel
#304 grade satin stainless steel 2mm thick
Nozzle
Chrome-plated zinc
Motor
- 200W brush type: dual ball bearings, 5500RPM
- 105°C auto reset safety overload
- 105°C auto reset safety overload
Power Use
240V, 50Hz, 2000-2400W, 10.0A
Sound Level
73db (+/- 3)
Drying Time
Less than 30 seconds
DP Rating
IPX 1
Element
1800-2200W
Heater
65°C auto reset thermostat
Warm Air
Speed: 28m/s
Temp: ambient +30°C
Temp: ambient +30°C
Protection
Over heating fuse (replaceable)
Timing
60 sec power cut off, auto reset
Sensor/Range
Auto Infrared - 180mm +/- 20mm preset, 100 - 300mm adjust
Case Security
4 SS theft resistant hex drive screws (hex key supplied)
Net Weight
9kg
Unit Size
320mmW x 338mmH x 178mmD
Wall Opening
295mmW x 313mmH x 175mmD
Nozzle
80mm projection
Warranty
1 year
Note
LIMITED STOCK AVAILABLE
* This unit is accessible compliant when installed in accordance with AS1428.1. guidelines.
* This unit is accessible compliant when installed in accordance with AS1428.1. guidelines.
DOWNLOADS
